Call 08046051411 83% Response Rate

Send Email

HSFG Bolts, High Tensile Bolts, Heavy Hex Bolts

HSFG - stands for High Strength Friction Grip and as the name suggests they make use of friction. Where a traditional bolt will stop the plates in a connection from moving apart by supporting the weight on the bolt shank in the form of shear stress, an HSFG supports the weight by clamping the plates so tightly together that they can’t slip past each other.

 

High Tensile Hex Bolt - is used in applications which have high stress on the fasteners. When connecting two parts together, the tensile stress forced on the fastener can break it. There are materials that have higher tensile strength to produce these bolts and Western Metals India is a leading high tensile fasteners manufacturer in india. The ordinary 304 stainless steel has tensile strength of 515MPa.

 

Heavy hex bolts - can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. Heavy hex bolts with forged heads are also commonly used as headed anchor bolts.

Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt
  • Full Thread Bolt

Full Thread Bolt

Product Price: Rs 300 / PieceGet Best Price

Product Brochure

Product Details:
Size1/2" to 60"
Thread TypeFull Thread
MaterialStainless Steel
Usage/ApplicationConstruction
ShapeRound
ColorSilver
Country of OriginMade in India
Full Thread Bolt

The Difference Between Fully Threaded Bolts & Partially Threaded Bolts. Fully threaded bolts have threads that run the entire length of the bolt whereas partially threaded bolts have an unthreaded area just beneath the head and then has partial threading the rest of the bolt length.

Full Thread Bolt

A partially threaded bolt stores its holding force at the threaded end, while a fully threaded bolt's holding force expands across the entire shaft section. Working with a fully threaded fastener means the tension placed on the bolt will spread over a larger surface area to withstand larger forces.

Full Thread Bolt

screw thread is a ridge wrapped around a cylinder or cone in the form of a helix, with the former being called a straight thread and the latter called a tapered thread.

Full Thread Bolt

There are three standard thread series in the Unified screw thread system that are highly important for fasteners: UNC (coarse), UNF (fine), and 8-UN (8 thread).

Full Thread Bolt

Fine threads feature a higher tensile strength, making them ideal for strength applications. The shallow pitch (helical angle) of fine threads makes them much less susceptible to loosening from vibration.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud
  • Stainless Steel Full Thread Stud

Stainless Steel Full Thread Stud

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Diameter10 mm
MaterialStainless Steel
Material GradeMild Steel
Usage/ApplicationConstruction
Head ShapeRound
TechniqueHot Rolled
Country of OriginMade in India
Stainless Steel Full Thread Stud

B8 and 304 SS All Thread Rod. 304 Stainless Steel all thread rod is manufactured from 304 stainless steel and tested to meet ASTM A193 and A320 Grade B8, where specified below.

Stainless Steel Full Thread Stud

They are often inserted into concrete or wood during a repair, and can be used to stabilize structures ranging from wooden furniture to concrete walls. Builders and contractors may also use a threaded rod when constructing homes or other types of buildings.

Stainless Steel Full Thread Stud

SS 304 Full Thread Stud at Rs 130/kilogram | Stainless Steel Stud in Mumbai | ID: 4619025188.

Stainless Steel Full Thread Stud

This makes stainless steel all thread rods great for some jobs and not so good for others. When it comes to metal strength, the stainless steel threaded rod proves when tested to be stronger than most Grade 2 steels, but weaker than Grade 5 and Grade 8 steel that have been hardened.

Stainless Steel Full Thread Stud

The Three Primary Types of Stainless Steel
  • Austenitic stainless steel. There are two main characteristics of this type of stainless steel. ...
  • Ferritic Stainless Steel. This type of stainless steel is the second most common type of alloy and is also magnetic. ...
  • Martensitic Stainless Steel.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt
  • Stainless Steel Foundation Bolt

Stainless Steel Foundation Bolt

Product Price: Rs 100 / KgGet Best Price

Product Brochure

Product Details:
Size1/2" to 60"
MaterialStainless Steel | Carbon Steel | Mild steel | MS | SS
GradeASTMA 403, WP 304 304L 304H 316 316L 317 317L 321 310 347 904L ETC.
ColorSilver
UsageIndustrial
Country of OriginMade in India
Stainless Steel Foundation Bolt

Material: Steel and Alloy. Grade A: En-8, En-19. Long length: 6000 mm.

Stainless Steel Foundation Bolt

Foundation Bolts are long threaded bolts, straight or bent in different styles, used for anchoring steel profiles and plates to concrete. Foundation bolts are coupled with hex nuts and plate washers to secure the joint. Foundation bolts are often used in bent profile such as J and L.

Stainless Steel Foundation Bolt

Stainless Steel Bolts is basically an iron-based alloy with minimum 10.5% chromium content. The word Stainless is derived from its oxidation resistance properties thus making the steel passive to corrosion often known by the technical term corrosion resistance.

Stainless Steel Foundation Bolt

Foundation bolts are mainly used in pre-engineered buildings manufacturing, fastening heavy machines to foundations,and construction. They are also used in process-based businesses like petrochemical, sugar, and FMCG manufacturing.

Stainless Steel Foundation Bolt

Stainless steel fasteners are made from a steel alloy that contains a minimum of 10.5% of Chromium and is also referred to as Inox steel. There are over 150 different grades and surface finishes of stainless steel fasteners and stainless bolts that are available.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt
  • SS 304 Stud Bolt

SS 304 Stud Bolt

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Product TypeThreaded
Size1/2" to 60"
GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
I Deal InNew Only
BrandWMI Group
Country of OriginMade in India
SS 304 Stud Bolt

Stainless steel 304 bolts are highly malleable, and it also supports welding. Stainless steel 304 bolts are generally used in environments where chloride constantly attacks the alloy. Stainless steel 304 Hex bolts provide excellent resistance from corrosion, crevice corrosion and stress cracking.

SS 304 Stud Bolt

Physical PropertiesMetricEnglish
Tensile Strength, Ultimate 505 MPa 73200 psi
Tensile Strength, Yield 215 MPa 31200 psi
Elongation at Break 70 % 70 %
Modulus of Elasticity 193 – 200 GPa 28000 – 29000 ks

SS 304 Stud Bolt

304. The most common stainless steel grade, comparable in strength to grade 2 materials, yet slightly weaker and easy to weld. The DIN/ISO denotation for an extremely similar grade is A2-70.

SS 304 Stud Bolt

Austenitic Stainless Steel

This type of stainless includes these grades: 302, 303, 304, 304L, 316, 32, 347 and 348. They also have a tensile strength of between 80,000 - 150,000 PSI.

SS 304 Stud Bolt

Stainless Steel Fasteners: The 304 Series

The 304 stainless steel fasteners series is made up of approximately 18% chromium and 8% nickel (18-8). These fasteners, which also include the 302, 302HQ, 303 and 305, are characterized by multiple variables and grades with a close chemical composition.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt
  • SS 316 Stud Bolt

SS 316 Stud Bolt

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Product TypeBolt
Size1/2" to 60"
GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
Surface TreatmentBlack Oxide, Plain, Black
BrandWMI Group
Country of OriginMade in India
SS 316 Stud Bolt

316 Stainless Steel Bolts are made up of an austenitic stainless steel that is corrosion resistant and strong. Suraj Metal Corporationis a leading manufacturer and supplier of the different types such as the 316 Stainless Steel Screws in different sizes and standards. The specifications are ASTM and ASME A193 and 194.

SS 316 Stud Bolt

Grade 316 – this grade of stainless steel fastener is required in extreme environments. The carbon content is set to 0.8% while the nickel content is increased. These fasteners are non-magnetic, can only be hardened by cold working and are austenitic.

SS 316 Stud Bolt

STAINLESS STEEL MATERIAL GRADE. Stainless steel fasteners are particularly popular in the automotive industry, which involves stainless steel screws in the construction of structural automotive components.

SS 316 Stud Bolt

Two of the most commonly used SS Stud Bolts Materials by Stainless Steel Stud Bolt Manufacturers In India include the austenitic stainless steel grade 304 & 316.

SS 316 Stud Bolt

Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic grade second only to 304 in commercial importance. 316 stainless steel contains an addition of molybdenum that gives it improved corrosion resistance.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.



Get Best QuoteRequest A Callback
Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt
  • Mild Steel J Shape Foundation Bolt

Mild Steel J Shape Foundation Bolt

Product Price: Rs 200 / KgGet Best Price

Product Brochure

Product Details:
MaterialMild Steel
Size1/2" to 60"
ShapeJ
Bolt ShapeJ
Usage/ApplicationIndustrial
Type Of BoltsJ Bolt
Head TypeRound
Material GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
ColorSilver
BrandWMI Group
Country of OriginMade in India
Mild Steel J Bolt

The J-Bolt is UNC thread and available in sizes ranging from 3/16″ to 1/2″ to fit every project. This bolt is made from grade 304 stainless steel for corrosion resistance and durability, making it perfect for marine and industrial applications.

Mild Steel J Bolt

J-bolts are J-shaped fasteners, threaded on the flat side. They are often used in structural applications like securing walls to concrete foundations. The bent end hooks around rebar for support, and may be cast in concrete for use as an anchor bolt.

Mild Steel J Bolt

Mild Steel Nuts and Bolts are made up of a mild steel or low carbon steel material. The low carbon or mild steel materials have good ductility and hardness together but have less strength than the ordinary stainless steels.

Mild Steel J Bolt

J-bolts are typically made from carbon, stainless, or galvanized steel for corrosion resistance.

Mild Steel J Bolt

J-bolt anchoring bolts come in many different lengths, the most common are 6, 8, and 12 inches long. These bolts are threaded at the top, for about two inches, and the rest of the bolt is smooth.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt

Galvanized J Bolt

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
Size1/2" to 60"
Bolt ShapeJ
Usage/ApplicationConstruction
Type Of BoltsJ Bolt
Head TypeRound
Material GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
ColorSilver
BrandWMI Group
Country of OriginMade in India

Galvanized J Bolt

Galvanized bolts are made from steel and coated with zinc to protect them from corrosion, rust, and other environmental damage. These bolts can be found in a variety of applications, from automobiles to bridges to home construction.

Galvanized J Bolt

J-bolts are typically made from carbon, stainless, or galvanized steel for corrosion resistance.

Galvanized J Bolt

The J-Bolt is UNC thread and available in sizes ranging from 3/16″ to 1/2″ to fit every project. This bolt is made from grade 304 stainless steel for corrosion resistance and durability, making it perfect for marine and industrial applications.


Galvanized J Bolt

J-bolts, also known as jay bolts, anchor bolts or hook bolts, are often used in construction and engineering applications. These hook anchors are used to secure objects to concrete or masonry surfaces, particularly foundation walls.

Galvanized J Bolt

Galvanized coatings corrode preferentially to steel, providing cathodic or sacrificial protection to small areas of steel exposed through damage. Unlike organic coatings, small damaged areas need no touch up.

 

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers
  • High Strength Structural Bolts Nuts Washers

High Strength Structural Bolts Nuts Washers

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Size1 inch
MaterialStainless Steel
Corrosion Resistance100%
BrandWMI
TypeHALF THREAD AND FULL THREAD
Country of OriginMade in India
High Strength Structural Bolts Nuts Washers

Heavy hex nuts are slightly larger and thicker than standard (finished) hex nuts. There are numerous grades and the heavy pattern is typically used for large diameter and high strength bolts.

High Strength Structural Bolts Nuts Washers

Per the ASTM A325 and A490 specification, they are specific to the grade of washer that is recommended, however it is not stated that a washer is required.

High Strength Structural Bolts Nuts Washers

High Strength Structural Bolt IS 3757 Grade 8.8 and 10.9 Manufacturer India | BigBoltNut.

High Strength Structural Bolts Nuts Washers

Structural Washers are medium carbon steel, heat treated and hardened to 35-41 HRC. Structural Washers are for use with Structural Bolts and are designed for steel-to-steel structural connections such as buildings and bridge construction.

High Strength Structural Bolts Nuts Washers

High strength bolts or structural bolts are made to be used with heavy hex nuts to connect structural members. To be considered a structural connection, it has to conform to specific ASTM standards; specifically, ASTM A563 or ASTM A194. Structural bolts are also categorized by grades.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.


Get Best QuoteRequest A Callback
High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt
  • High Tensile Bolt

High Tensile Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Diameter2 mm
Usage/ApplicationIndustrial
Size1/2" to 60"
BrandWMI Group
GradeGrade 4.6
ColorSilver
MaterialStainless Steel | Carbon Steel | Mild Steel | SS | MS
Country of OriginMade in India
High Tensile Bolt

The high tension bolt comes in different sizes ranging from M2 through M100 with lengths ranging from 6mm to 500mm. There are also different grades of the High Tensile bolts ranging from 8.8, 10.9, 12.9 and so on.

High Tensile Bolt

High-tensile bolts are made from medium carbon alloy steel that has undergone quenching and tempering. This process makes them harder than standard grade 8 bolts and, therefore, more able to withstand higher levels of stress and strain.

High Tensile Bolt

The High Tensile Bolt Material can vary in composition according to the material grade. Most of these are chromium nickel and nickel copper alloys as they hold high tensile strength. The M8 High Tensile Bolts are around 8mm in diameter and can range in different lengths and grades of material.


High Tensile Bolt

High Tensile Structural Bolts, Hardness: 32 - 39 Hrc, Thread Size: Half Threaded.

High Tensile Bolt

Check if there are any head markings. They will indicate if the bolt is metric or imperial and the grade/class. 2. Look at the threaded part of the bolt/setscrew and identify if it is a fine thread or coarse thread.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

Get Best QuoteRequest A Callback
High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts

High Strength Friction Grip Bolts

Product Price: Rs 200 / KgGet Best Price

Product Brochure

Product Details:
Bolt DiameterM3 (3 mm)
Nominal Length40 mm
FinishElectro Galvanized (EG)
Size1/2" TO 60"
Bolt TypeHSFG Bolts
Material GradeASTMA 403, WP 304 304L 304H 316 316L 317 317L 321 310 347 904L ETC.
Country of OriginMade in India
High Strength Friction Grip Bolts

HSFG bolts are also commonly used in structures that will be exposed to a lot of vibrations, or loadings that will reverse. Since the bolts are preloaded the tension in the bolt doesn't vary as much as in a standard bolt, so they don't fatigue as quickly.

High Strength Friction Grip Bolts


High strength bolts or structural bolts are made to be used with heavy hex nuts to connect structural members. To be considered a structural connection, it has to conform to specific ASTM standards; specifically, ASTM A563 or ASTM A194. Structural bolts are also categorized by grades.

High Strength Friction Grip Bolts

High-strength bolts are a type of fastener that is made from alloy steel. They have higher tensile strength than regular bolts and are used in applications with more rich pins.High Strength Friction Grip Bolts
The number markings are engraved on the top or side of the bolt head. Common metric classes are 5.8, 8.8, 10.9, and 12.9. The higher the numbers are, the stronger the material of the fastener is.

High Strength Friction Grip Bolts

Explanation: Shear Capacity of HSFG bolts is μfnekhFomf, where μf = coefficient of friction(0.55), ne = number of frictional interfaces offering frictional resistance to slip, kh = 1 for fasteners in clearance holes, 0.85 for fasteners in over sized and short slotted holes, γmf = 1.1 (slip resistance designed at ...

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8
  • High Tensile Bolts And Nuts Grade 8.8

High Tensile Bolts And Nuts Grade 8.8

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Size1/2" to 60"
BrandWMI
GradeGrade 4.6
MaterialStainless Steel | Carbon Steel | Mild Steel | SS | MS
Country of OriginMade in India
High Tensile Bolts And Nuts Grade 8.8

Grade 8.8 Bolts are manufactured using medium carbon steel that has been quenched and tempered. Used in railroad equipment, motors, engines and processing equipment, grade 8.8 bolts exhibit good tensile strength and perform well in most environments.


High Tensile Bolts And Nuts Grade 8.8

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decade



High Tensile Bolts And Nuts Grade 8.8

Property Class 8.8 Tensile Strength = 800 MpaOn metric high tensile bolts the relevant property class is indicated on the head (refer AS1110). Tensile Strength = 700 MpaGeneral purpose stainless steel with good resistance to corrosion.


High Tensile Bolts And Nuts Grade 8.8

Metric hex nuts, Zinc plated class 8.8 steel, 8mm x 1.0mm.


High Tensile Bolts And Nuts Grade 8.8


Bolts & Nuts Hot-dipped Galvanised (Grade 8.8) M20x90 (90mm.) Weight per Pieces: 0.344 g.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.



Get Best QuoteRequest A Callback
High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts
  • High Tensile Bolts

High Tensile Bolts

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationConstruction
Size1/2" to 60"
BrandWMI Group
GradeGrade 4.6
ColorSilver
MaterialStainless Steel | Carbon Steel | Mild Steel | SS | MS
Country of OriginMade in India
High Tensile Bolts

The high tension bolt comes in different sizes ranging from M2 through M100 with lengths ranging from 6mm to 500mm. There are also different grades of the High Tensile bolts ranging from 8.8, 10.9, 12.9 and so on.

High Tensile Bolts

Grade 8.8 High Tensile – Commonly referred to as the structural grade for bolts. Grade 8.8 is one of the most common forms of high tensile material and is stocked in plain finish or zinc. It can further be plated in many other coatings.

High Tensile Bolts

The High Tensile Bolt Material can vary in composition according to the material grade. Most of these are chromium nickel and nickel copper alloys as they hold high tensile strength. The M8 High Tensile Bolts are around 8mm in diameter and can range in different lengths and grades of material.

High Tensile Bolts

Check if there are any head markings. They will indicate if the bolt is metric or imperial and the grade/class. 2. Look at the threaded part of the bolt/setscrew and identify if it is a fine thread or coarse thread.

High Tensile Bolts

Mild steel and high tensile steel are two types of carbon steel structures. High tensile steel is a type of mild steel because both these contain a low amount of carbon. The main difference between mild steel and high tensile steel is that high tensile steel has a high-quality strength than mild steel.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt
  • Stainless Steel High Tensile Bolt

Stainless Steel High Tensile Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Type Of BoltsElevator Bucket Bolts
MaterialStainless Steel | Carbon Steel | Mild Steel | SS | MS
Size1/2" to 60"
BrandWMI Group
GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
I Deal InNew Only
Country of OriginMade in India
Stainless Steel High Tensile Bolt

When compared with mild steels, stainless steels tend to have higher tensile strength. The duplex stainless steels have higher tensile strengths than austenitic steels. The highest tensile strengths are seen in the martensitic (431) and precipitation hardening grades (17-4 PH).

Stainless Steel High Tensile Bolt

High-tensile bolts are made from medium carbon alloy steel that has undergone quenching and tempering. This process makes them harder than standard grade 8 bolts and, therefore, more able to withstand higher levels of stress and strain.

Stainless Steel High Tensile Bolt

Its distinguishing characteristic is the high amount of chromium. Stainless steel contains a minimum of 10.5% of chromium that improves its corrosion resistance and strength. The chromium in the alloy creates a passive layer on oxidation when exposed to air.

Stainless Steel High Tensile Bolt

The vast majority of stainless steel fasteners available are produced to ISO 3506 Class 70 (this designates a minimum tensile strength of 700 MPa) and are marked as such. If there is no marking it should be assumed the product is Class 50 (minimum tensile strength of 500 MPa).

Stainless Steel High Tensile Bolt

The primary difference between high-tensile bolts and stainless steel bolts is strength versus corrosion resistance. High-tensile bolts offer greater strength than stainless steel bolts but are less resistant to corrosion, whereas stainless steel bolts offer greater resistance to corrosion but less strength.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt
  • SS High Tensile Bolt

SS High Tensile Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
SizeM4 (4 mm)
MaterialStainless Steel
GradeAISI 302, 304, 304L, ETC.
TypeFlange Bolt
I Deal InNew Only
BrandWMI Group
ColorSilver, Black
Place Of OriginMumbai
Country of OriginMade in India
SS High Tensile Bolt

High tensile steel bolts and fixings are typically available in grades 8.8 to 12.9.

SS High Tensile Bolt

High-tensile bolts are made from medium carbon alloy steel that has undergone quenching and tempering. This process makes them harder than standard grade 8 bolts and, therefore, more able to withstand higher levels of stress and strain

SS High Tensile Bolt

The vast majority of stainless steel fasteners available are produced to ISO 3506 Class 70 (this designates a minimum tensile strength of 700 MPa) and are marked as such. If there is no marking it should be assumed the product is Class 50 (minimum tensile strength of 500 MPa).

SS High Tensile Bolt

When compared with mild steels, stainless steels tend to have higher tensile strength. The duplex stainless steels have higher tensile strengths than austenitic steels. The highest tensile strengths are seen in the martensitic (431) and precipitation hardening grades (17-4 PH).

SS High Tensile Bolt

The high tension bolt comes in different sizes ranging from M2 through M100 with lengths ranging from 6mm to 500mm. There are also different grades of the High Tensile bolts ranging from 8.8, 10.9, 12.9 and so on.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
High Strength Bolts
  • High Strength Bolts
  • High Strength Bolts
  • High Strength Bolts
  • High Strength Bolts
  • High Strength Bolts

High Strength Bolts

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Diameter4 mm
MaterialStainless Steel
Grade304
FinishingPolished
Head ShapeRound
Surface FinishPowder Coated
Thread TypeHalf Thread
High Tensile Strength Bolt 

A common example would be in an automotive system, where high tensile bolts: Hold together the linkages of the suspension system; or. Attach the brake calipers to the knuckles.

High Tensile Strength Bolt 

The tensile strength of a material is the maximum stress that can be applied to it before it breaks. The tensile strength of aluminum alloys can be increased by special treatments. Because of their high tensile strength, these products are suitable for boring in drilling machines.

High Tensile Strength Bolt

Grade 8.8 high tensile steel is often referred to as the structural grade for bolts. It is the most common form of high tensile material and is usually stocked in plain finish or zinc. It can be plated in many other coatings. 

High Tensile Strength Bolt 

Tensile strength is one of the most important and widely measured properties of materials used in structural applications. High tensile strength plastics can take the place of metal in many applications, reducing weight and cost without sacrificing performance.

High Tensile Strength Bolt

The high tension bolt comes in different sizes ranging from M2 through M100 with lengths ranging from 6mm to 500mm. There are also different grades of the High Tensile bolts ranging from 8.8, 10.9, 12.9 and so on.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
SS Bolt Nut
  • SS Bolt Nut
  • SS Bolt Nut
  • SS Bolt Nut

SS Bolt Nut

Product Price: Rs 72 / KgGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
GradeSS
ShapeHexagonal
Bolt TypeHex Bolt
Surface FinishingPowder Coated
Packaging TypeBox
BrandWMI
Country of OriginMade in India
Backed by rich industrial experience we are offering ms bolt nut to our customers providing the best services to our customers at reasonable rates.
Get Best QuoteRequest A Callback
High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts
  • High Strength Friction Grip Bolts

High Strength Friction Grip Bolts

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Diameter4 mm
MaterialMild Steel
Size1/2" TO 60"
Bolt TypeHSFG Bolts
ShapeHex
Country of OriginMade in India
High Strength Friction Grip Bolts

HSFG bolts are also commonly used in structures that will be exposed to a lot of vibrations, or loadings that will reverse. Since the bolts are preloaded the tension in the bolt doesn't vary as much as in a standard bolt, so they don't fatigue as quickly.

High Strength Friction Grip Bolts

High strength bolts or structural bolts are made to be used with heavy hex nuts to connect structural members. To be considered a structural connection, it has to conform to specific ASTM standards; specifically, ASTM A563 or ASTM A194. Structural bolts are also categorized by grade.

High Strength Friction Grip Bolts

HSFG bolts have great strength and are manufactured from medium carbon steel bars. By using tempering and quenching processes, the strength of HSFG bolts is built. This process is also considered alloying steel.

High Strength Friction Grip Bolts

Friction-type bolts are the type of bolts that are tightened in order to resist the force that is equal to the proof loads. The fasteners are so tightened so that the clamping occurs. In this type of bolt, there is high pressure in the connected parts.

High Strength Friction Grip Bolts

Bolts which transfer load by friction are known as High Strength Friction Grip (HSFG) bolts. Controlled tightening of the bolts allows the frictional action to be quantified for design. The main advantages of HSFG bolted connections are their greater stiffness and their ability to withstand alternating forces.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts
  • Stainless Steel Square U Bolts

Stainless Steel Square U Bolts

Product Price: Rs 300 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
Size1/2" TO 48" Inch
ShapeRound
Material GradeAISI 302, 304, 304L, 316, 316L, 310,317, 317L, 321, 347, 410, 420, 904L, ETC.
Usage/ApplicationConstruction
Type Of BoltsRound-head
BrandWMI Group
Country of OriginMade in India
Stainless Steel Square U Bolts

Square U Bolts are designed to fix an item to a box section structure or trunking, or used for clamping square or rectangular items. Typically, they find themselves in use within the suspension of metal channels and duct work – but can also be embedded in concrete as anchor bolts or used to secure heavy equipment.

Stainless Steel Square U Bolts

U-Bolts up to 13" long has a typical yield strength of 90,000 PSI and a tensile strength of 120,000 PSI. The 14" and longer U-bolts typically have a yield strength of 115,000 PSI and 133,000 PSI tensile strength.

Stainless Steel Square U Bolts

Square u-bolts custom manufactured from M12 to M36 in diameter to any specification. Provided usually in galvanising finish but also can be supplied in plain steel or made from stainless steel upon request. Typically used for attaching to a square shape post, they can also be embedded in concrete as a hold bolt anchor.

Stainless Steel Square U Bolts

U-bolts are typically made from carbon steel or stainless steel and can be either plain or galvanized. U-bolts can secure objects to various surfaces, including concrete, wood, and metal. U-bolts typically have two nuts and two washers, which are used to secure the bolt in place.

Stainless Steel Square U Bolts

Resistance to corrosion – stainless steel does not rust or tarnish giving you a better look and lasts longer. Strength – stainless steel is strong and it will hold up in harsh corrosive environments and it will also hold up in place with very high or low temperatures.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.


Get Best QuoteRequest A Callback
Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt
  • Galvanized J Bolt

Galvanized J Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Size1/2" to 60"
Bolt ShapeJ
Usage/ApplicationIndustrial
Type Of BoltsJ Bolt
Head TypeRound
Material GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
ColorSilver
BrandWMI Group
Country of OriginMade in India
Galvanized J Bolt

Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon ...

Galvanized J Bolt

Well hex nuts give a good granularity of angles for a tool to approach from… and this especially helps out when a person is dealing with tight spots. Hex nuts are easy to turn because they have six parallels. Because hex nuts have six sides, a person can turn a fastener one-sixth of the way to reach the next parallel.

Galvanized J Bolt

A finished hex nut made from steel with a max carbon content of 0.55%, a min manganese content of 0.30%, and a maximum sulfur content of 0.05%. Designed for use with bolts with a min tensile strength equal to or less than 150,000 psi.

Galvanized J Bolt

Mild steel can be divided into five grades depending on its chemical composition, mechanical properties, and tensile strength. These grades include A36, S275JR, S355JR, Q195, and Q235B. Each grade offers unique properties that make it suitable for specific applications.

Galvanized J Bolt

Mild Steel Bolt - MS Bolt Latest Price, Manufacturers & Suppliers.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
Stainless Steel Stud Bolts
  • Stainless Steel Stud Bolts
  • Stainless Steel Stud Bolts
  • Stainless Steel Stud Bolts
  • Stainless Steel Stud Bolts
  • Stainless Steel Stud Bolts

Stainless Steel Stud Bolts

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Size1/2" TO 48" AND ABOVE OTHER
ShapeU
Material GradeAISI 302, 304, 304L, 316, 316L, 310,317, 317L, 321, 347, 410, 420, 904L, ETC.
Usage/ApplicationConstruction
Type Of BoltsHex Head
ColorSilver
BrandWMI Group
Country of OriginMade in India

Stainless Steel Stud Bolt

304 Stainless steel is often used to make Machine Screws, Cap Screws, Sheet Metal Screws, Hex Cap Screws and all cold headed or hot forged fasteners. It is often used in food service and dye applications because of its ability to resist the corrosive properties of organic acids.

Stainless Steel Stud Bolt

Stainless steel fasteners are made from a steel alloy that contains a minimum of 10.5% of Chromium and is also referred to as Inox steel. There are over 150 different grades and surface finishes of stainless steel fasteners and stainless bolts that are available.

Stainless Steel Stud Bolt

Stud bolts have a variety of uses across many industries, but they are most commonly used in construction, automotive, and industrial applications. For example, they are often used in large-scale construction projects such as bridges and dams, where components must be securely connected.

Stainless Steel Stud Bolt

303 and 304 Stainless are the most commonly listed grades, the standard grade for stainless fasteners. They are corrosion-resistant and durable.

Stainless Steel Stud Bolt

Stainless steel fasteners are strong and will hold up in harsh corrosive environments. Stainless steel fasteners will last longer than other fasteners. Stainless steel fasteners are resistant to extreme cold and hot temperatures.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod
  • 6 mm Mild Steel Threaded Rod

6 mm Mild Steel Threaded Rod

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Diameter6 mm
MaterialMild Steel
Length1000MM
Usage/ApplicationIndustrial
Thread TypeFull Thread
Country of OriginMade in India
 Mild Steel Threaded Rod 

Threaded rod, as its name suggests, is a metal rod that is threaded throughout the entire length of the rod. It's typically made from carbon, zinc coated or stainless steel. The threading allows for bolts and other types of fixings to be fastened onto the rod to suit many different construction applications. 

Mild Steel Threaded Rod 

Double-End Threaded Rod or Double-Ended Threaded Bar
  • Tap-End Studding. This will look similar to double end studs, but the threaded portion is longer at one end than at the other.
  • Hollow Threaded Rod. ...
  • Fine Threaded Rod or Fine Pitch Threaded Rod.
 Mild Steel Threaded Rod 

Threaded rods are available in a huge range of materials and finishes, including various Steel grades (4.8, 5.8, 8.8, 10.9 and 12.9), as well as A2 Stainless Steel and A4 Stainless Steel. Mild Steel Threaded Rod 

White indicates the strongest rods. Red is the second strongest, made of 316L stainless steel, also called A4. Green is the third strongest, made of 304 stainless steel, or A2. 

Mild Steel Threaded Rod 

Steel rods are essential elements in construction, circular steel bars with a corrugated finish that allows them to adhere better to concrete, prevent slippage of the structure, and absorb pressure, tensile and torsional forces in construction.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.

Get Best QuoteRequest A Callback
Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt
  • Round L Bolt

Round L Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Bolt ShapeL
Usage/ApplicationConstruction
Size1/2" to 60"
Type Of BoltsL Bolt
Head TypeRound
Steel GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
ColorSilver
Country of OriginMade in India
L Bolt

The L-Bolt anchor bolts are used to attach sill plates to concrete or masonry foundations, provide anchorage for light weight post bases and for general anchorage to concrete.

L Bolt

The overall size range of the L shaped bolts range from 3/8 to 16 inches in diameter and from 6inches to 12 inches in length with the thread length being 2 inches and the hook varying from 1 inch to 1 ½ inches. The Stainless Steel L anchor bolts are useful as they are strong, corrosion resistant and last longer.

L Bolt

L-Shape bent anchor bolts (also known as foundation bolts) are commonly used in structural, concrete and masonry applications. They are frequently utilized to support beams, plates, ledgers, and other structural members in buildings, signage, or other structures erected on concrete and masonry.

L Bolt

The Dale Company is a bent anchor bolt distributor and manufactures high-quality, galvanized and stainless steel L bolts used in structural, concrete and masonry applications.

L Bolt

An L key bolt is a type of fastener that features a head shaped like an “L” as opposed to the traditional hexagon or square shape.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
High Tensile Hex Bolt
  • High Tensile Hex Bolt
  • High Tensile Hex Bolt
  • High Tensile Hex Bolt
  • High Tensile Hex Bolt

High Tensile Hex Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
ColorSilver
GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
Size1/2" to 60"
I Deal InNew Only
BrandDelta Fitt
Country of OriginMade in India
High Tensile Hex Bolt

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decades.

High Tensile Hex Bolt

The high tension bolt comes in different sizes ranging from M2 through M100 with lengths ranging from 6mm to 500mm. There are also different grades of the High Tensile bolts ranging from 8.8, 10.9, 12.9 and so on.

High Tensile Hex Bolt

Screws and bolts made from high tensile steel can withstand high levels of strain without losing their strength or structure. Take a look at some of our products available in High Tensile Steel: Threaded rod (Available in Grade 4.8 to 12.9) High tensile bolts (Available in Grade 5.5 to 12.9)

High Tensile Hex Bolt

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decades.

High Tensile Hex Bolt

Grade 8.8 High Tensile – Commonly referred to as the structural grade for bolts. Grade 8.8 is one of the most common forms of high tensile material and is stocked in plain finish or zinc. It can further be plated in many other coatings.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt
  • MS High Tensile Bolt

MS High Tensile Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Diameter2 mm
Grade302
Usage/ApplicationIndustrial
MaterialStainless Steel
Surface FinishingPRIME
Head ShapeHex
Surface FinishPowder Coated
Thread TypeFull Thread
Country of OriginMade in India
MS High Tensile Bolt

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decades.

MS High Tensile Bolt

Mild steel and high tensile steel are two types of carbon steel structures. High tensile steel is a type of mild steel because both these contain a low amount of carbon. The main difference between mild steel and high tensile steel is that high tensile steel has a high-quality strength than mild steel.

MS High Tensile Bolt

Mild Steel Nuts and Bolts are made up of a mild steel or low carbon steel material. The low carbon or mild steel materials have good ductility and hardness together but have less strength than the ordinary stainless steels.

MS High Tensile Bolt

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decades.

MS High Tensile Bolt

This type of fastener can be used for a wide range of applications, such as automotive, plumbing, electrical, and many more. Its compact size also makes it ideal for use in confined applications. MS Bolt Nuts also offer excellent strength and corrosion resistance, which ensures that they last for a long time.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt
  • High Tensile Strength Bolt

High Tensile Strength Bolt

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Diameter2 mm
MaterialMild Steel
Length70 mm, 1/2" TO 60"
Bolt TypeHSFG Bolts
Head ShapeRound
ShapeHexagon
Country of OriginMade in India
High Tensile Strength Bolt 

A common example would be in an automotive system, where high tensile bolts: Hold together the linkages of the suspension system; or. Attach the brake calipers to the knuckles.

High Tensile Strength Bolt 

The tensile strength of a material is the maximum stress that can be applied to it before it breaks. The tensile strength of aluminum alloys can be increased by special treatments. Because of their high tensile strength, these products are suitable for boring in drilling machines.

High Tensile Strength Bolt

Grade 8.8 high tensile steel is often referred to as the structural grade for bolts. It is the most common form of high tensile material and is usually stocked in plain finish or zinc. It can be plated in many other coatings. 

High Tensile Strength Bolt 

Tensile strength is one of the most important and widely measured properties of materials used in structural applications. High tensile strength plastics can take the place of metal in many applications, reducing weight and cost without sacrificing performance.

High Tensile Strength Bolt

The high tension bolt comes in different sizes ranging from M2 through M100 with lengths ranging from 6mm to 500mm. There are also different grades of the High Tensile bolts ranging from 8.8, 10.9, 12.9 and so on.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts
  • HSFG Bolts And Nuts

HSFG Bolts And Nuts

Product Price: Rs 1,200 / PieceGet Best Price

Product Brochure

Product Details:
Size1/2" TO 48" AND ABOVE OTHER
Material GradeAISI 302, 304, 304L, 316, 316L, 310,317, 317L, 321, 347, 410, 420, 904L, ETC.
Usage/ApplicationIndustrial
ColorSilver
I Deal InNew Only
BrandWMI
Country of OriginMade in India

HSFG Bolts And Nuts

HSFG bolts are high strength structural bolts which have been tightened such as to induce predefined tension in the bolt shank. Due to the tension in the bolt, the interface between the plies (steel members in a joint) cannot move relative to each other because of the frictional resistance

HSFG Bolts And Nuts

HSFG bolts are also commonly used in structures that will be exposed to a lot of vibrations, or loadings that will reverse. Since the bolts are preloaded the tension in the bolt doesn't vary as much as in a standard bolt, so they don't fatigue as quickly.

HSFG Bolts And Nuts

Explanation: Shear Capacity of HSFG bolts is μfnekhFomf, where μf = coefficient of friction(0.55), ne = number of frictional interfaces offering frictional resistance to slip, kh = 1 for fasteners in clearance holes, 0.85 for fasteners in over sized and short slotted holes, γmf = 1.1 (slip resistance designed at ...

HSFG Bolts And Nuts

Bolt value is the strength of the bolt. Strength of bolt is taken as the minimum value of the following. Shearing strength in a bolt. Bearing strength in a bolt. Tensile strength in a bolt.

HSFG Bolts And Nuts

1 For example, property class 8.8 means that the bolt will have nominal Ultimate Tensile strength of 800 N/mm2, and lower yield stress of 80% of 800 N/mm2, i.e. 640 N/mm2.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

Get Best QuoteRequest A Callback
Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts
  • Hex Head Bolts

Hex Head Bolts

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
SizeM 4 TO M 48
ShapeHexagonal
Material GradeSTAINLESS STEEL CARBON STEEL MILD STEEL HIGH TENSILE 4.6 8.8 10.9 12.9
Usage/ApplicationIndustrial
Head StyleHexagonal
I Deal InNew Only
MaterialStainless Steel
ApplicationMachinery
ConnectionCommon Bolt
Country of OriginMade in India
Hex Head Bolts

Hexagonal heads have more sides than square heads, so they offer more surfaces to grip with a traditional wrench. This makes hex bolts easier to use in small spaces. Hex bolts allow for greater torque as well. Torque is turning force.

Hex Head Bolts

Hex bolts range in size from 1/4" to 4" in diameter; 1/4" to 1 1/2" sizes are commonly available. Lengths range from 3/8" to 24"; 1/2" to 10" is typical. From 3/8" to 1", lengths are in 1/8" increments. Between 1" and 4", 1/4" steps are common.

Hex Head Bolts

A hex bolt with metric thread pitch made from medium carbon steel and heat-treated. Grade-A bolts are the preferred style for most applications. Grade-B bolts have looser tolerances and can be manufactured in a cold or hot-forging process.

Hex Head Bolts

To calculate a bolt length, multiply the bolt diameter by 2, then add in any additional material thicknesses.

Hex Head Bolts

Hex Bolt M12 (12mm) x 35mm x 1.75mm Mild Steel MS Zinc Plated.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

Get Best QuoteRequest A Callback
Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt
  • Ms High Tensile Bolt

Ms High Tensile Bolt

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationConstruction
Size1/2" to 60"
BrandDelta Fitt
GradeGrade 4.6
ColorSilver
MaterialStainless Steel | Carbon Steel | Mild Steel | SS | MS
Country of OriginMade in India
Ms High Tensile Bolt

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decades.

Ms High Tensile Bolt

Mild Steel Nuts and Bolts are made up of a mild steel or low carbon steel material. The low carbon or mild steel materials have good ductility and hardness together but have less strength than the ordinary stainless steels.


Ms High Tensile Bolt

High Tensile Hex Bolt is used in applications which have high stress on the fasteners.
...
High Tensile Hex Bolt Specification Chart.
GradesGrade 10.9, Grade 8.8, DIN 933 Grade 12.9
Standard IS 1364 / IS 1363 & DIN EN ISO 4014 & 4017 DIN 931 / 933

Ms High Tensile Bolt

Mild steel and high tensile steel are two types of carbon steel structures. High tensile steel is a type of mild steel because both these contain a low amount of carbon. The main difference between mild steel and high tensile steel is that high tensile steel has a high-quality strength than mild steel.

Ms High Tensile Bolt

High tensile bolts are used for high-stress fastening applications. For example, you would usually require high tensile bolts in the realms of construction or other similar industrial environments. These high tensile bolts help to secure heavy objects together and shoulder their weight for many years, or even decades.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.


Get Best QuoteRequest A Callback
Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts
  • Hsfg Bolts Nuts

Hsfg Bolts Nuts

Product Price: Rs 100 / KgGet Best Price

Product Brochure

Product Details:
ColorSilver
MaterialStainless Steel
GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
Size1/2" to 60"
Usage/ApplicationIndustrial
BrandDelta Fitt
Country of OriginMade in India
HSFG Bolts

Bolts which transfer load by friction are known as High Strength Friction Grip (HSFG) bolts. Controlled tightening of the bolts allows the frictional action to be quantified for design. The main advantages of HSFG bolted connections are their greater stiffness and their ability to withstand alternating forces.


HSFG Bolts

medium carbon steel barsHSFG bolts have great strength and are manufactured from medium carbon steel bars. By using tempering and quenching processes, the strength of HSFG bolts is built. This process is also considered alloying steel.

HSFG Bolts

Identification. The property class of bolts (8.8 or 10.9) shall be embossed or indented as 8S or 10S respectively on the top of head along with the manufacturer's identification symbol. 2 Alternately, marking '8.8 S' or '10.9 S' are also acceptable.

HSFG Bolts

HSFG bolts are also commonly used in structures that will be exposed to a lot of vibrations, or loadings that will reverse. Since the bolts are preloaded the tension in the bolt doesn't vary as much as in a standard bolt, so they don't fatigue as quickly.

HSFG Bolts

Type 1 – medium carbon steel or alloy steel, or boron steelType 2 – low carbon martensitic steel (this designation was removed from the standard in 1991) Type 3 – weathering steel.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

Get Best QuoteRequest A Callback
Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100
  • Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationConstruction
Size1/2" to 60"
BrandWMI
GradeGrade 4.6
ColorSilver
MaterialStainless Steel | Carbon Steel | Mild Steel | SS | MS
Country of OriginMade in India

Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

Grade 10.9 bolts: As these bolts are most often used in the automotive industry, they are also referred to as 'car bolts'. They are made of boron or carbon steel and have high tensile strength (1040 MPa).

Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

ISO 4014 / 4017 Hex Head Bolts
Property Class10.912.9
Hardness (HRC)32-3939-44
Tensile Strength (Mpa)1,040 min.1,220 min.
Yield Strength at 0.2% Offset (Mpa)940 min.1,100 min.
Elongation (%)9 min.8 min.


Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

Class 10.9 is similar to grade 8. A low carbon steel for general use.

Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

Property Class 10.9 bolts and screws have a minimum tensile strength of 1040 MPa for all sizes. As you can see, they're slightly stronger than the nominal value in the property class designation. Property Class 10.9 bolts are considered high-strength parts. They're in the neighborhood of SAE J429 Grade 8 parts.

Mild Steel High Tensile Bolts 10.9 Grade For Industrial, 100

Grade 10.9 carbon steel bolts are safe, especially from fires, hurricanes, tornadoes, and earthquakes. Furthermore, they are considered to be green because they can be recycled and are an environmentally friendly material. Grade 10.9 fasteners are also used in applications that are prone to shocks.


Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.

DELIVERY TIME

5-7 Days or as per the PO Terms.
Get Best QuoteRequest A Callback
SS Structural Bolts
  • SS Structural Bolts
  • SS Structural Bolts
  • SS Structural Bolts
  • SS Structural Bolts
  • SS Structural Bolts

SS Structural Bolts

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Bolt DiameterM4 (4 mm)
MaterialStainless Steel
Nominal Length8 mm
FinishHot Dip Galvanized (HDG)
BrandWMI
Country of OriginMade in India
Structural Bolts

How Do Structural Bolts Work? Structural bolts work by creating a strong connection between two pieces of metal using tension forces rather than welding them together. To do this, structural bolts are tightened with a nut until the bolt head touches the material being joined.

Structural Bolts

ASTM A325 structural bolts are heavy hex bolts made of medium carbon steel with a flat bearing surface, washer faced, and chamfered point. They are commonly used in structural steel joints in heavy construction and available in diameters ranging from 1/2” up to 1-1/2”. A325 bolts come in two types.

Structural Bolts

The two types of bolts commonly used in steel construction include high strength structural steel, and A307 bolts (common bolts). Structural steel bolts are subcategorised into A325 (Group A) and A490 (Group B) and are high strength.

Structural Bolts

Sometimes, we'll refer to a structural bolt as “standard” or “non-standard.” Basically, standard structural bolts have a body length and thread length based on ASME standards (Ref. ASME 18.2. 6). Non-standard refers to bolts that are not on this chart, but can be custom made to fit customer needs.
Get Best QuoteRequest A Callback
Hot Forged Bolts
  • Hot Forged Bolts
  • Hot Forged Bolts
  • Hot Forged Bolts

Hot Forged Bolts

Product Price: Rs 20 / PieceGet Best Price

Product Brochure

Product Details:
Bolt DiameterM4 (4 mm)
MaterialAlloy Steel
FinishHot Dip Galvanized (HDG)
ApplicationConstruction/Automotive
ThreadsFull Thread
ColorSilver
BrandWMI
Backed by rich industrial experience we are offering Hot Forged Bolts our customers providing the best services to our customers at reasonable rates.
Get Best QuoteRequest A Callback
SS 302 Mushroom Head Square Neck Bolt
  • SS 302 Mushroom Head Square Neck Bolt
  • SS 302 Mushroom Head Square Neck Bolt
  • SS 302 Mushroom Head Square Neck Bolt

SS 302 Mushroom Head Square Neck Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
ColorSilver
Grade302
Usage/ApplicationIndustrial
BrandWMI
Country of OriginMade in India
Mushroom Head Square Neck Bolt

Plastic Slotted Mushroom Head Screws, made to ISO 7380, are typically used for bolting softer materials. They host a wide head, low profile and a traditional slot drive – fastened using a standard flat blade screwdriver.

Mushroom Head Square Neck Bolt

A mushroom bolt is a log cut from a healthy living tree for the production of gourmet mushrooms. Each log is 30-36 inches in length and 4-6 inches in diameter. All logs are cut from Sweetgum trees and produce mushrooms incredibly well.

Mushroom Head Square Neck Bolt

Square Neck Bolts are also known as square neck carriage bolts. Square neck bolts are most commonly used in wood. They generally have a square or domed top and a square base under the head. This square base pulls into the wood as the nut is tightened for a secure fit.

Mushroom Head Square Neck Bolt

Robertson screw, also known as a square screw or Scrulox, is a type of screw with a square-shaped socket in the screw head and a corresponding square protrusion on the tool.

Mushroom Head Square Neck Bolt

The hex head was developed as far back as the very early 1830's (James Nasmith) , and the square continued mainly in the production of agricultural implements. In Australia the implement manufacturers bought square mild steel bars and made their own, say into the 30's (Depression).

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
SS Mushroom Head Square Neck Bolt
  • SS Mushroom Head Square Neck Bolt
  • SS Mushroom Head Square Neck Bolt
  • SS Mushroom Head Square Neck Bolt
  • SS Mushroom Head Square Neck Bolt

SS Mushroom Head Square Neck Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
ColorSilver
Grade302
ShapeRound
Usage/ApplicationIndustrial
Country of OriginMade in India
Mushroom Head Square Neck Bolt

Plastic Slotted Mushroom Head Screws, made to ISO 7380, are typically used for bolting softer materials. They host a wide head, low profile and a traditional slot drive – fastened using a standard flat blade screwdriver.

Mushroom Head Square Neck Bolt

A mushroom bolt is a log cut from a healthy living tree for the production of gourmet mushrooms. Each log is 30-36 inches in length and 4-6 inches in diameter. All logs are cut from Sweetgum trees and produce mushrooms incredibly well.

Mushroom Head Square Neck Bolt

Square Neck Bolts are also known as square neck carriage bolts. Square neck bolts are most commonly used in wood. They generally have a square or domed top and a square base under the head. This square base pulls into the wood as the nut is tightened for a secure fit.

Mushroom Head Square Neck Bolt

Robertson screw, also known as a square screw or Scrulox, is a type of screw with a square-shaped socket in the screw head and a corresponding square protrusion on the tool.

Mushroom Head Square Neck Bolt

The hex head was developed as far back as the very early 1830's (James Nasmith) , and the square continued mainly in the production of agricultural implements. In Australia the implement manufacturers bought square mild steel bars and made their own, say into the 30's (Depression).

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
Head Square Neck Bolt
  • Head Square Neck Bolt
  • Head Square Neck Bolt
  • Head Square Neck Bolt
  • Head Square Neck Bolt

Head Square Neck Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
MaterialStainless Steel
ColorSilver
Grade302
Diameter2mm
Surface TreatmentPolished
Country of OriginMade in India
Mushroom Head Square Neck Bolt

Plastic Slotted Mushroom Head Screws, made to ISO 7380, are typically used for bolting softer materials. They host a wide head, low profile and a traditional slot drive – fastened using a standard flat blade screwdriver.

Mushroom Head Square Neck Bolt

A mushroom bolt is a log cut from a healthy living tree for the production of gourmet mushrooms. Each log is 30-36 inches in length and 4-6 inches in diameter. All logs are cut from Sweetgum trees and produce mushrooms incredibly well.

Mushroom Head Square Neck Bolt

Square Neck Bolts are also known as square neck carriage bolts. Square neck bolts are most commonly used in wood. They generally have a square or domed top and a square base under the head. This square base pulls into the wood as the nut is tightened for a secure fit.

Mushroom Head Square Neck Bolt

Robertson screw, also known as a square screw or Scrulox, is a type of screw with a square-shaped socket in the screw head and a corresponding square protrusion on the tool.

Mushroom Head Square Neck Bolt

The hex head was developed as far back as the very early 1830's (James Nasmith) , and the square continued mainly in the production of agricultural implements. In Australia the implement manufacturers bought square mild steel bars and made their own, say into the 30's (Depression).

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
SS 304L Stud Bolt
  • SS 304L Stud Bolt
  • SS 304L Stud Bolt
  • SS 304L Stud Bolt
  • SS 304L Stud Bolt

SS 304L Stud Bolt

Product Price: Rs 200 / PieceGet Best Price

Product Brochure

Product Details:
Diameter2 mm
MaterialStainless Steel
Usage/ApplicationIndustrial
Product TypeBolt
Grade304
Surface TreatmentPlain
Packaging TypeBox
ThreadedYes
SS 304 Stud Bolt

Stainless steel 304 bolts are highly malleable, and it also supports welding. Stainless steel 304 bolts are generally used in environments where chloride constantly attacks the alloy. Stainless steel 304 Hex bolts provide excellent resistance from corrosion, crevice corrosion and stress cracking.

SS 304 Stud Bolt

Physical PropertiesMetricEnglish
Tensile Strength, Ultimate 505 MPa 73200 psi
Tensile Strength, Yield 215 MPa 31200 psi
Elongation at Break 70 % 70 %
Modulus of Elasticity 193 – 200 GPa 28000 – 29000 ks

SS 304 Stud Bolt

304. The most common stainless steel grade, comparable in strength to grade 2 materials, yet slightly weaker and easy to weld. The DIN/ISO denotation for an extremely similar grade is A2-70.

SS 304 Stud Bolt

Austenitic Stainless Steel

This type of stainless includes these grades: 302, 303, 304, 304L, 316, 32, 347 and 348. They also have a tensile strength of between 80,000 - 150,000 PSI.

SS 304 Stud Bolt

Stainless Steel Fasteners: The 304 Series

The 304 stainless steel fasteners series is made up of approximately 18% chromium and 8% nickel (18-8). These fasteners, which also include the 302, 302HQ, 303 and 305, are characterized by multiple variables and grades with a close chemical composition.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback
L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt
  • L Type Bolt

L Type Bolt

Product Price: Rs 100 / PieceGet Best Price

Product Brochure

Product Details:
Bolt ShapeL
Usage/ApplicationConstruction
Size1/2" to 60"
Type Of BoltsL Bolt
Head TypeRound
Steel GradeAISI 302, 304, 304L, 316, 316L, 310, 317, 321, ETC.
ColorSilver
Country of OriginMade in India
L Type Bolt

The L-Bolt anchor bolts are used to attach sill plates to concrete or masonry foundations, provide anchorage for light weight post bases and for general anchorage to concrete. The L-Bolt anchor bolts meet the prescriptive requirements of article 9.23.

L Type Bolt

The overall size range of the L shaped bolts range from 3/8 to 16 inches in diameter and from 6inches to 12 inches in length with the thread length being 2 inches and the hook varying from 1 inch to 1 ½ inches. The Stainless Steel L anchor bolts are useful as they are strong, corrosion resistant and last longer.

L Type Bolt

L-bolt anchoring bolts come in many different lengths, the most common are 6, 8, and 12 inches long. These bolts are threaded at the top, for about two inches, and the rest of the bolt is smooth.

L Type Bolt

L Anchor is an L shaped anchor manufactured from glass fibers as a complementary product in strengthening applications. Based on specification requirements, it can be sand coated to further increase its adherence properties. Strengthening of historical and reinforced concrete structures with textile reinforcement.

L Type Bolt

Foundation Bolt (Anchor or L-Bolt) M16 x 440 mm Zinc Plated Mild Steel. Info.

Countries We deliver

OMAN, UAE, QATAR, DOHA, SAUDI ARABIA, SOUTH AFRICA, CAMEROON, UNITED KINGDOM, SOUTH KOREA, JAPAN, KUWAIT, ITALY, SPAIN, GERMANY, POLAND, NETHERLANDS, NIGERIA, DAR ES SALAM, ANTALYA, IRAQ, IRAN, ISRAEL, MEXICO, CANADA, NORWAY, FINLAND, HAMSBERG, RUHR, MOSCOW, MOROCCO, MAURITIUS ISLAND, MALDIVES, INDONESIA, FINLAND, SWITZERLAND, BRAZIL, MALTA, PORTUGAL & ACROSS THE GLOBE.

SIZE WE MANUFACTURE

1/2" TO 48"
ALSO CUSTOMISED PROJECTS ACCEPTED & MANUFACTURED.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Western Metal India. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.